INSTALLATION INSTRUCTIONS
Flex 2G Kit for vehicles (CM-FLEX2GO)
SureCall, Inc.
Page 7
All rights reserved.
2.
Using the supplied cable, connect the antenna to the booster connector
marked
INSIDE
(see page 4).
3.
Hand tighten the connection.
Step 3: Mount the Booster
1.
Select a location for your booster, such as under the driver
’s seat.
Step 4: Connect to DC Power
1.
Connect the Power Cord.
Connect the DC power cord to the booster before
plugging it into the cigarette lighter adapter. Verify that all connections to the
booster are tight and secure.
2.
Turn the power switch on the lighter adapter to the ON position.
The LED light glows, indicating that the booster is ready to use. The booster
turns on automatically.
The
Power
LED goes ON to show that the booster is ready for use (see
If the
Power
LED does not go ON, be sure the DC outlet and adapter are
working.
