Sure Heat Manufacturing Altima AGR30PF Скачать руководство пользователя страница 3

TABLE OF CONTENTS

GENERAL SAFETY INSTRUCTIONS...................................................................2

GRILL FEATURES....................................................................................................3-4

INSTALLATION / ASSEMBLY............................................................................... .5-7

BUILT-IN INSTALLATION......................................................................................8-10

GAS REQUIREMENTS............................................................................................11-12

LEAK TESTING........................................................................................................13

USING THE GRILL..................................................................................................14-19

Lighting the Grill.............................................................................................14-17
Rotisserie burner..............................................................................................18-19

ROUTINE CLEANING.............................................................................................20

BURNER REMOVAL AND CLEANING............................................................... 21

TROUBLE SHOOTING........................................................................................... 22-23

WARRANTY...............................................................................................................24

Please retain this manual for future reference

Содержание Altima AGR30PF



























Отзывы: