GAS REQUIREMENTS
L.P. Gas Installation
Altima Gas Grills that are set to operate with L.P. gas come with a high capacity hose and regulator assembly.
This assembly is designed to connect directly to a standard 20 lb. L.P. cylinder for the 30” model, or a 30 lb.
cylinder for the 38” or 48” models.
For all models:
Remove tape from brass fitting first. Attach the gas hose assembly to the brass 3/8 flared fitting com-
ing out of the appliance regulator on the bottom of the grill. Tighten securely and attach to the propane
tank. (sold separately) (See Fig. 10)
L.P. Tank Information
Never use a dented or rusted L.P. tank or cylinder with a damaged valve.
The L.P. cylinder must be provided with a shut-off valve terminating in an L.P. gas supply cylinder outlet spec-
ified, as applicable, for connection No. 510 in the standard for compressed gas cylinder valve outlet and inlet
connection ANSI/CGA-V-1. Cylinders must not be stored in a building, garage, or any other enclosed area.
The L.P. Gas supply cylinder must be constructed and marked in accordance with the specifications for L.P.
gas cylinders of the U.S. Department of Transportation (DOT) or the National Standard of Canada, CAN/CAS-
B339, “Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods.”
12
Fig. 10
