5. Box content
20 micron
filter cartridge
made of polypropylene
S-PP20
Components with filter cartridges
4
S-L-CARB
,
S-L-MIN
, PUMP
1 x transparent filter
housings
2 x white filter
5 micron
filter cartridge
made of polypropylene
S-PP5
RO membrane
element
Carbon block
filter cartridge
S-BL
Wrench for
filter housing
Teflon tape
Chrome-plated adapter
with seal
(3/8” MIP
x
3/8
”
FIP
x
1/4
”
FIP
)
Chrome-plate
5
faucet
Chrome-plate
6
faucet
RO water tank (12 liters)*
* nominal capacity
1
for SUPREME-RO5 system
2
for SUPREME-RO6
systems
3
for SUPREME-RO7 system
4
for SUPREME-RO6-P system
5
for SUPREME-RO5 system
6
for SUPREME-RO6, SUPREME-RO6-P, SUPREME-RO7 systems
Instruction Manual
Ball valve
for water tank
Tubings
Shut off valve
Clamp
Required water pH....................................................................................................................................................................................................2 pH - 11 pH
3
Max. general water hardness.............................................................................................................................................................................400 ppm (mg / l)
Max. alkalinity....................................................................................................................................................................................................................8 mval/l
3
Fe, Mg contant..................................................................................................................................................................................................
< 0.05 ppm
(mg / l)
1
Max. SDI index.....................................................................................................................................................................................................................SDI 5
2
3
Max. TDS salinity...............................................................................................................................................................................................
2000 ppm
(mg / l)
1
SDI
-
SDI - (Silt Density Index) is a measure for the fouling capacity of water in RO systems (RO membranes). SDI value should be < 5.
2
TDS -
(Total Disolved Solids) total amount of mobile charged ions, including minerals, salts or metals dissolved in a given volume of water.
3
ppm
- parts per million
.
* distributor is not responsible for damages caused by the system operating with different inlet water parameters.
4. Required inlet water parameters for RO systems*
Components with filter cartridges
1
S-L-CARB
Components with filter cartridges
2
S-L-CARB
and
S-L-MIN
Components with filter cartridges
3
S-L-CARB
,
S-L-MIN
, AIFIR2000
supreme
best water solutions
Содержание RO5 PREMIUM
Страница 1: ...Installation Manual Instrukcja monta u...