Easy SET-UP to operate your AMPLIFIER
The set-up to operate your AMPLIFIER is as follows:
1. Insert 2 new alkaline 1.5V batteries AAA/LR03 into the back of your RC 7; Follow the markings in the
battery compartment.
2. Switch on your AMPLIFIER.
3. Look for the brand name of your AMPLIFIER (e.g. Sony) on the attached list with codes.
4. Next to the brand name you will find one or more 3-digit code numbers which have to be entered
into your RC 7 remote control.
5. Press the key on your RC 7
6. Press the
TUNER/
key (for about 5 seconds) until the LED flashes twice.
7. Press again the
TUNER/
key shortly.
8. Enter the first 3-digit code from the list (e.g.
for Sony) with the number keys on
your RC 7.
9. The LED will blink twice to indicate that the code has been accepted.
10. Aim your RC 7 at your AMPLIFIER and press the key.Your RC 7 is set up correctly if
your AMPLIFIER switches off.
11. If your AMPLIFIER does not react and/or it operates incorrectly, repeat step 3. to step 9. by entering
the next 3-digit code from the list.
12. If none of the 3-digits codes of this form operates your AMPLIFIER properly, use the ”Search
Method” of your RC 7 remote control.
Search Method
If the Easy Set-Up procedure was not successfully, try the Automatic Search Method on your RC 7
remote control:
A. Make sure that 2 new batteries have been inserted correctly (see step 1. of the Easy Set-Up).
B. Switch on your TELEVISION.
C. Press the key on your RC 7 (for about 5 seconds) until the LED flashes twice.
D. Enter code with the number keys of your RC 7.The LED blinks twice.
E. Continue pressing the key on your RC 7 until your TELEVISION switches off.This step
may take up to 15 minutes. (Using the Search Method in VCR, CD or TAPE-mode, continue pressing
the key; in TUNER-mode, continue pressing the key).
F. Now press the key on your RC 7 again until the LED flashes twice.
G. If your TELEVISION operates incorrectly, repeat step B. to step F. A new code search begins with the
last code number found in the previous search. Please be patient.There may be many codes to search
through before the code for your device is found.
Special Functions of your RC 7:
Brightness / colour / contrast / etc.
Adjusting brightness / colour / contrast / bass / treble / balance of your television with your RC 7
remote control:
1. Make sure your RC 7 is in the TV-mode (Press ).
2. Press
/SHIFT
.
3. Press within 5 seconds:
brightness.
colour.
contrast.
treble.
bass.
balance.
4. Use the and to adjust the settings of your television.
5. After 5 seconds your RC 7 will return to the normal functions to operate the channel selection.
OK key on your RC 7
• TV-Mode
Resets your TELEVISION to the basic settings.
• TV-Mode/menu
Confirmation key.
• VCR-Mode
Recording key (press twice).
• SAT-Mode
Confirmation key.
• TAPE-Mode
Recording key (press twice).
Make a note of the 3-digits codes of your devices for future reference, because you will
need these codes to set-up your RC 7 remoet control again after replacing the batteries):
TV
VCR
SAT
CD
TAPE
TUNER
AMPLIFIER
7
8
7
0
0
1
1
2
3
4
5
6
■
TV
TV
2
TV
AUD
SAT
SAT
+
-
