11
OPERATING INSTRUCTIONS
1 . Turn the heater on or off by pressing the
Power button on the control panel (C) or by
pressing the ON/OFF button on the remote
control (B) .
Once the power is off, heating elements
will stop working first . The fan will continue
working for up to 90 seconds to dispense
residual heat inside the heater . This is a
normal function .
1
C
B
2 . Select a heat setting by pressing the MODE
button on either the control panel (C) or the
remote control (B) to toggle between the
three heat settings .
Power for high mode is 1,500 W; low is 1,000
W . ECO mode is an economic energy saving
function . When ECO mode is chosen, the
heater will operate to maintain a constant
warm 68°F .
Note: The ECO LED light will only illuminate
when the ECO function is active and the
ambient room temperature falls below
68ºF / 20ºC .
2
HIGH
LOW
ECO
C
B
3 . Set the temperature by pressing the arrows on
the control panel (C) or the remote control (B) .
You can set the temperature on the heater
anywhere between 50°F and 90°F or between
10°C and 32°C . Once you have chosen the
desired temperature, the heater will remain
on until the room temperature increases to
the temperature on the digital display . The
heater will cycle on and off to maintain the
desired room temperature .
To view the ambient temperature short press
the ambient temperature button on the
control panel (C) or remote control (B) .
Note: To switch between Fahrenheit and
Celsius, press and hold the ambient
temperature button on the control panel
(C) for 5 seconds .
Note: To engage the child lock on the remote
(B), press and hold for 3 seconds .
Deactivate the lock by repeating these
steps .
3
C
B
C
B
OR
