background image

4

SAFETY INFORMATION 

Please read and understand this entire manual before attempting to assemble, operate, or install the product .

IMPORTANT SAFETY INSTRUCTIONS

WARNING:  POTENTIAL  ELECTRICAL  HAZARD  IF  NOT  ADHERED  TO .  When  using  electrical 

appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and 

injury to persons, including the following:
•  This heater must be plugged into a 120 V, 15 amp (or more) circuit of its own . Do not plug anything 

else  into  the  same  circuit .  If  unsure  if  your  home  meets  this  specification,  consult  a  certified 

electrician prior to use . Risk of fire, overheating, malfunction, property damage, injury, or even 

death may result if not adhered to!

•  Connect to a properly grounded, 3-prong outlet only . Do not connect the heater to extension cords, 

surge protectors, timers, direct breakers, or an outlet with other appliances connected to the same 

outlet . Risk of fire, overheating, malfunction, property damage, injury, or even death may result 

if not adhered to!

•  This heater is hot when in use . To avoid burns, do not let bare skin touch hot surfaces . Use handles 

(certain models) or wheels to move this heater . 

•  Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 

3 ft . (0 .9 m) from the front of the heater and keep them away from the sides and rear of the heater .

•  Extreme caution is necessary when any heater is used by or near children, invalids, pets, or when 

the heater is left operating unattended .

•  Always unplug the heater when not in use .

•  Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been 

dropped, or damaged in any manner . Contact the manufacturer for resolution options .

•  Do  not  use  outdoors .  Exposure  to  outdoor  elements  such  as  rain,  snow,  sun,  wind,  or  extreme 

temperatures may cause the heater to become a safety hazard .

•  This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations, nor any 

locations that use GFCI outlets .

•  Never place the heater where it may fall into a bathtub or other water receptacles .

•  Do  not  run  the  cord  under  carpet .  Do  not  cover  the  cord  with  throw  rugs,  runners,  or  similar 

coverings . Arrange the cord away from traffic areas and where it will not be tripped over .

•  The heater must be plugged into a wall outlet that is a dedicated circuit with a minimum 15 amp 

rating on that individual circuit . 

•  To disconnect the heater, first turn the power button to the OFF position and then remove the plug 

from the wall outlet .

•  Do not allow foreign objects to enter or block any ventilation or exhaust opening as this may cause 

electric shock, fire, or damage the heater .

•  Allow at least 3 ft . of unobstructed space to the front and rear of the heater to allow for maximum 

heat, air, and ventilation flow . 

•  A heater has hot and arcing or sparking parts inside . Do not use it in areas where gasoline, paint, 

or flammable liquids are used or stored, nor use flammable solvents to clean the heater . Keep the 

heater dry at all times . 

•  Use  this  heater  only  as  described  in  this  manual .  Any  other  use  not  recommended  by  the 

manufacturer may cause fire, electric shock, or injury to persons .

•  Do not use abrasive solvents to clean the heater as it may cause damage to the finish or casing .

•  To prevent a possible fire, do not block air intakes or exhaust in any manner . Do not use on soft 

surfaces, like a bed, where opening may become blocked .

•  Always  plug  heaters  directly  into  a  wall  outlet/receptacle .  Never  use  with  an  extension  cord  or 

relocatable power tap (outlet/power strip) .

 

SAVE THESE INSTRUCTIONS

Содержание HT1153

















Отзывы: