the corresponding white plastic
connector with the blue and
yellow wires from the control
box.
3.
Set the black plastic battery
cover into place over the
battery and secure with 4 small
screws. (Supplied in the parts
package) Tighten screws until
snug.
4.
Set the seat in the appropriate
position on the car. Making
sure that the tabs on the front
of the seat goes into the slots
on the body of the car. Push in
until snapped into place.
Charging Port:
The charging port is located below
the front of the seat. Once the
charger is connected to the car, plug
into a wall outlet.
BATTERY MUST
BE CHARGED FOR A MINIMUM OF
12 HOURS BEFORE INITIAL USE TO
AVOID DAMAGE TO THE BATTERY.
There is a red LED light near the charging
port. This light remains on while
charging. The light will not turn green
when charging is complete, it will always
remain red!
Once battery is fully charged, disconnect from charger. Switch power
button to the on position to start the car. Once, power is on, all the lights
come on accompanied by the sound of the engine. To allow child to
operate the car, remote control/manual switch must be set to the manual
position. To move the car forward, gear selector switch must be set to the
forward position and to move the car backward, the switch will need to be
set to the back position.
