ASSEMBLY INSTRUCTIONS:
Rear Wheel/Axle Assembly
1.
Turn Car Upside down.
2.
Remove rear axle from front axle by
cutting two white plastic ties.
3.
Remove the protective plastic cover from
the ends of the axle and discard.
4.
Insert the rear axle into the bottom of the
car towards the rear.
5.
Apply a thin layer of grease (supplied)
uniformly
over the outer 6” of each end of
the rear axle.
6.
Install a washer on the axle.
7.
Install a
1”
axle sleeve on the left side
with wide flange toward the end of the
axle. (Looking from the rear of the car
and the car is upside down)
8.
Install the gear box on the left side with
motor going into the body of the car.
(Looking from the rear of the car and the
car is upside down)
9.
Install a Tire on the left side.
10.
Install a washer and a tire retaining clip.
Important:
It is necessary to make sure
that the retaining clip fits securely into the
groove on the end of the axle!
Right Rear Axle (In Order)
11.
Install a washer onto the axle.
12.
Install a
1”
axle sleeve with the wide
flange toward the car body.
13.
Install the
5/8”
axle sleeve with wide
flange toward the end of the axle.
14.
Install a Washer.
15.
Install one of the Tires onto the axle.
16.
Install a Washer and a tire retaining clip.
Important:
It is necessary to make sure
that the retaining clip fits securely into the
groove on the end of the axle!
17.
Finally, install the wheel cover onto both
tires.
Installing the Front Wheels
1.
Apply a thin layer of grease
(supplied) uniformly onto the axle.
2.
Install a washer onto the axle.
3.
Install the tire onto the axle.
4.
Install a washer and a tire retaining
clip onto the axle.
Important:
It is
necessary to make sure that the
retaining clip fits securely into the
groove on the end of the axle!
5.
Finally, install the wheel cover.
Repeat steps for opposite side of car.
