Supero X9DRX+-F, Руководство пользователя

Страница: 22 / 115

1-14
X9DRX+-F Motherboard User’s Manual
filter to shield the computer from noise. It is recommended that you also install a
power surge protector to help avoid problems caused by power surges.
1-7 Serial Port Connection Support
Two high-speed, 16550 compatible serial communication ports (UARTs) are sup-
ported by the BaseBoard Controller (Vuvoton WPCM450 BMC) installed on the
motherboard. Each UART includes a 16-byte send/receive FIFO, a programmable
baud rate generator, complete modem control capability, and a processor interrupt
system. Both UARTs provide legacy speed with baud rate of up to 115.2 Kbps
as well as an advanced speed with baud rates of 250 K, 500 K, or 1 Mb/s, which
support higher speed modems.
The Super I/O provides functions that comply with ACPI (Advanced Configuration
and Power Interface), which includes support of legacy and ACPI power manage-
ment through an SMI or SCI function pin. It also features auto power management
to reduce power consumption.
Note 1: For more information on IPMI configuration, please refer to the
IPMI User's Guide posted on our website at http://www.supermicro.com/
support/manuals/.
Note 2 : The term "IPMI controller" and the term "BMC controller" can be
used interchangeably in this section.
1-8 Advanced Power Management
The following advanced power management features are supported by this moth-
erboard:
Intel
®
Intelligent Power Node Manager (NM) (Available
when the NMView utility is installed in the system)
The Intel
®
Intelligent Power Node Manager (IPNM) provides your system with
real-time thermal control and power management for maximum energy efficiency.
Although IPNM Specification Version 1.5/2.0 is supported by the BMC (Baseboard
Management Controller), your system must also have IPNM-compatible Manage-
ment Engine (ME) firmware installed to use this feature.
Note
: Support for IPNM Specification Version 1.5 or Vision 2.0 depends
on the power supply used in the system.