Supero X9DRL-7F, Руководство пользователя

Страница: 89 / 113

Chapter 4: AMI BIOS
4-15
RAID Mode
The following items are displayed when RAID Mode is selected:
SATA RAID Option ROM/UEFI Driver
Select Enabled to boot the system from a SATA RAID device or a UEFI
(Unified Extensible Firmware Interface) device. The options are
Enabled
or Disabled.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for a port specified by the user.
The options are Enabled and Disabled.

PCIe/PCI/PnP Configuration
This submenu allows the user to configure the following PCIe/PCI/PnP settings.
Launch Storage OpROM Policy
This feature selects the Storage Option ROM to be used to bootup the system
from a storage device when there are multiple Storage Option ROMs available.
The options are UEFI Only and
Legacy Only .
PCI Latency Timer
Use this feature to set the latency timer of each PCI device installed on a PCI bus.
Select 64 to set the PCI latency to 64 PCI clock cycles. The options are 32 PCI
Bus Clock,
64 PCI Bus Clock , 96 PCI Bus Clock, 128 PCI Bus Clock, 160 PCI Bus
Clock, 192 PCI Bus Clock, 224 PCI Bus Clock, and 248 PCI Bus Clock.
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR number for a PCI Bus
Signal Error Event. The options are Enabled and
Disabled .
SERR# Generation
Select Enabled to allow a PCI device to generate a SERR number for a PCI Bus
Signal Error Event. The options are Enabled and
Disabled .
Maximum Payload
Select Auto to allow the system BIOS to automatically set the maximum payload
value for a PCI-E device to enhance system performance. The options are
Auto ,
128 Bytes and 256 Bytes.