2-34
X9DRG-HF/X9DRG-HTF Motherboard User’s Manual
Management Engine (ME) Recovery
Use Jumper JPME1 to select ME Firm-
ware Recovery mode, which will limit
resource allocation for essential system
operation only in order to maintain nor-
mal power operation and management.
In the single operation mode, online
upgrade will be available via Recovery
mode. See the table on the right for
jumper settings.
ME Recovery
Jumper Settings
Jumper Setting Definition
1-2
Normal (Default)
2-3
ME Recovery
A. JPME1
B. JPME2
A
Manufacture Mode Select
Close pin 2 and pin 3 of Jumper JPME2
to bypass SPI flash security and force
the system to operate in the Manufac-
ture Mode, allowing the user to flash the
system firmware from a host server for
system setting modifications. See the
table on the right for jumper settings.
ME Mode Select
Jumper Settings
Jumper Setting Definition
1-2
Normal (Default)
2-3
Manufacture Mode
B
