background image

Chapter 1: Overview

1-11

1-2   Processor and Chipset Overview

Built upon the functionality and the capability of Intel E5-2600(v2) Series Proces-
sors (Socket R LGA 2011) and the C602 chipset, the X9DRG-HF/X9DRG-HTF 

motherboard provides the performance and feature sets required for dual_proces

-

sor-based 1U or 2U GPU server platforms. (See note below for processor support.)

With support of Intel QuickPath interconnect (QPI) Technology, the X9DRG-HF/
X9DRG-HTF offers point-to-point serial interconnect interface with a transfer 
speed of up to 8.0 GT/s, providing superb system performance. 

The PCH chipset provides extensive IO support, including the following functions 
and capabilities:

• 

PCI-Express Rev. 2.0 support

• 

PCI-Express Gen. 3 uplink supported by some SKUs

• 

ACPI Power Management Logic Support Rev. 3.0b or Rev. 4.0      

• 

USB host interface backplane and front access support

• 

Intel Rapid Storage Technology supported

• 

Intel Virtualization Technology for Directed I/O (Intel VT-d) supported

• 

Intel Trusted Execution Technology supported

• 

Serial Peripheral Interface (SPI) Supported

• 

Digital Media Interface (DMI) supported

• 

Advanced Host Controller Interface (AHCI) supported

Note

: For Intel E5-2600(v2) processor support, BIOS version 3.0 or 

above is required. 

Содержание X9DRG-HF














































































































Отзывы: