Supero X9DRFF-7G+, Руководство пользователя

Страница: 84 / 105

4-16
X9DRFF-iG+/iTG+/7G+/7TG+ Motherboard User’s Manual
Port 0~5 Staggered Spin-Up
Select Enabled to enable Staggered Spin-up support to prevent excessive
power consumption caused by multiple HDDs spinning-up simultaneously.
The options are Enabled and
Disabled .
RAID Mode
The following items are displayed when RAID Mode is selected:
SATA RAID Option ROM/UEFI Driver
Use this feature to enable the onboard SATA Option ROM or EFI driver. The
options are Enabled and Disabled.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for the particular port. The options
are Disabled and
Enabled .

PCIe/PCI/PnP Configuration
Launch Storage Add-on Card OpROM Priority
Use this feature to select the Option ROM you want to use to boot the system when
there are multiple Option ROMs available in the system. The options are UEFI only
and
Legacy only .
PCI Latency Timer
Use this feature to set the latency timer of each PCI device installed on a PCI bus.
Select 64 to set the PCI latency to 64 PCI clock cycles. The options are 32,
64 ,
96, 128, 160, 192, 224 and 248.
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR number for a PCI Bus
Signal Error Event. The options are Enabled and
Disabled .
SERR# Generation
Select Enabled to allow a PCI device to generate an SERR number for a PCI Bus
Signal Error Event. The options are Enabled and
Disabled .
Maximum Payload
Select Auto to allow the system BIOS to automatically set the maximum payload
value for a PCI-E device to enhance system performance. The options are
Auto ,
128 Bytes and 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.