Supero X9DR7-TF+, Руководство пользователя

Страница: 29 / 117

Chapter 2: Installation
2-5
OPEN 1st
WARNING
!
2-3 Processor and Heatsink Installation
Warning : When handling the processor package, avoid placing direct pressure on
the label area.
Notes:
•
Always connect the power cord last, and always remove it first before add -
ing, removing or changing any hardware components. Make sure that you
install the processor into the CPU socket before you install the CPU heatsink.
•
If you buy a CPU separately, make sure that you use an Intel-certified multi-
directional heatsink only.
•
Make sure to install the system board into the chassis before you install
the CPU heatsink.
•
When receiving a server board without a processor pre-installed, make sure
that the plastic CPU socket cap is in place and none of the socket pins are
bent; otherwise, contact your retailer immediately.
•
Refer to the Supermicro website for updates on CPU support.
Press down
on Load Lever
labeled 'Open 1st'.
Installing the LGA2011 Processor
1. There are two load levers on the LGA2011 socket. To open the socket cover,
first press and release the load lever labeled 'Open 1st'.
OPEN 1st
WARNING
!
1
2