manualshive.com logo in svg

Supero X7DCX, Руководство пользователя, Страница: 78 / 91

Поделиться
Скачать
Supero X7DCX Скачать руководство пользователя страница 78

4-22

             X7DCX User's Manual

VLAN Tagging

Select Enabled to enable Virtual LAN(s) for IPMI connections and allow the user to 

confi gure VLAN settings. The options are Enabled and 

Disabled

.

VLAN ID

If VLAN Tagging above is set to Enabled, this item allows the user to change the 

VLAN ID. If VLAN Tagging is disabled, this item will be ignored by the fi rmware.

IP Address Source

This item allows the user to select the IP address source for the connection. The 

options are DHCP (Dynamic Host Controller Protocol), and 

Static

. 

This item displays the IP address for the IPMI connection detected.

IP Subnet Mask

This item displays the IP Subnet Mask for the IPMI connection detected.

Default Gateway

This item displays the Default Gateway for the IPMI connection detected.

MAC Address

This item displays the MAC Address for the IPMI connection detected.

Update LAN Settings

Select Yes to allow BIOS update LAN setting. The options are Yes and 

No

.

X

IPMI LAN Control

This feature allows the user to confi gure IPMI LAN Control settings. 

Содержание X7DCX




























































































Отзывы:

Нет отзывов