manualshive.com logo in svg

Supero X7DCX, Руководство пользователя, Страница: 63 / 91

Поделиться
Скачать
Supero X7DCX Скачать руководство пользователя страница 63

Chapter 4: BIOS

4-7

4-4 Advanced 

Setup

 Choose Advanced from the  Phoenix BIOS Setup Utility main menu with the ar-

row keys.   You should see the following display. The items with a triangle beside 

them have sub menus that can be accessed by highlighting the item and pressing 

<Enter>.

X

Boot Features

Access the submenu to make changes to the following settings.

QuickBoot Mode

If enabled, this feature will speed up the POST (Power-On Self Test) routines by 

skipping certain tests after the computer is turned on. The options are 

Enabled

 and 

Disabled. If Disabled, the POST routine will run at normal speed. 

QuietBoot Mode

This setting allows you to 

Enable

 or disable the graphic logo screen at the boot-

up. 

POST Errors

Set to 

Enabled

 to display POST Error Messages if an error occurs at the bootup. 

If set to Disabled, the system will continue to boot without displaying any error 

message even when a boot error occurs. 

ACPI Mode

Select 

Yes

 to employ ACPI (Advanced Confi guration and Power Interface) power 

management on your system. The options are 

Yes

 and No.

Содержание X7DCX




























































































Отзывы:

Нет отзывов