manualshive.com logo in svg

Supero X7DCX, Руководство пользователя, Страница: 24 / 91

Поделиться
Скачать
Supero X7DCX Скачать руководство пользователя страница 24

2-2

             X7DCX User's Manual

X7DCX

2-2  Mounting the Motherboard in the Chassis

For proper installation, please follow the instructions below to mount the mother-

board into the chassis before installing the CPU on the motherboard.

Tools needed

Phillips screwdriver

• 

#6 32 x5mm pan head screw as shown below.

• 

Installation Procedures

Locate the mounting holes on the motherboard. Refer to the layout below for 

• 

the locations of the mounting holes. (The holes marked with arrows are the 

mounting holes on this motherboard.) 

Locate the mounting holes on the chassis.

• 

Align the mounting holes on the motherboard against the mounting holes on 

• 

the chassis.

Insert a #6 pan head screw into a pair of mounting holes on the motherboard 

• 

and on the chassis. 

Using a Phillips screwdriver, tighten the screw. Make sure that the standoffs on 

• 

the chassis click in or are screwed in tightly.

Repeat the step above until the motherboard is securely installed into the 

• 

chassis.

Содержание X7DCX




























































































Отзывы:

Нет отзывов