Supero X10SLV, Руководство пользователя

Страница: 84 / 107

4-18
X10SLV/-Q Motherboard User’s Manual
Port 0 ~ Port 3 Hot Plug
This feature designates the port specified for hot plugging. Set this item to En -
abled for hot-plugging support, which will allow the user to replace a SATA disk
drive without shutting down the system. The options are
Enabled and Disabled.
Port 0 ~ Port 1 SATA Device Type
This feature configures the selected SATA port to support either a solid state
drive or hard disk drive. The options are Hard Disk Drive and Solid Sate Drive.
Port 0 ~ Port 3 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRE-
SET initialization sequence to the device. The options are Enabled and
Disabled .
If the item above - SATA Mode Selectiion is set to IDE , the following items
are displayed:
Serial ATA Port 0~ Port 3
This item displays the information detected on the installed SATA drives on the
particular SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
If the item above - SATA Mode Select is set to RAID , the following items are
displayed (this is supported on the X10SLV-Q only) :
Serial ATA Port 0~ Port 3
This item displays the information detected on the installed SATA drives on the
particular SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
Port 0 ~ Port 3 Hot Plug
This feature designates this port for hot plugging. Set this item to Enabled for
hot-plugging support, which will allow the user to replace a SATA drive without
shutting down the system. The options are
Enabled
and Disabled.
Port 0 ~ Port 1 SATA Device Type
This feature configures the selected SATA port to support either a solid state
drive or hard disk drive. Set this item to Enabled to enable hot-plugging. The
options are
Hard Disk Drive and Solid Sate Drive.