Supero SuperWorkstation 7045A-3, Руководство пользователя

Страница: 32 / 120

4-2
S
UPER
W
ORKSTATION 7045A-3 User's Manual
4-2 General Safety Precautions
Follow these rules to ensure general safety:
Keep the area around the SuperWorkstation 7045A-3 clean and free of clut-
ter.
The SuperWorkstation 7045A-3 weighs approximately 63 lbs (28.6 kg). When
lifting the system, two people at either end should lift slowly with their feet
spread out to distribute the weight. Always keep your back straight and lift
with your legs.
Place the chassis top/side cover and any system components that have been
removed away from the system or on a table so that they won't accidentally
be stepped on.
While working on the system, do not wear loose clothing such as neckties and
unbuttoned shirt sleeves, which can come into contact with electrical circuits
or be pulled into a cooling fan.
Remove any jewelry or metal objects from your body, which are excellent metal
conductors that can create short circuits and harm you if they come into con-
tact with printed circuit boards or areas where power is present.
!
The power supply power cord must include a grounding plug and must be
plugged into grounded electrical outlets.
Serverboard Battery: CAUTION - There is a danger of explosion if the onboard
battery is installed backwards, which will reverse its polarities (see Figure 4-
1). This battery must be replaced only with the same or an equivalent type
recommended by the manufacturer. Dispose of used batteries according to
the manufacturer's instructions.
DVD-ROM Laser: CAUTION - this server may have come equipped with a
DVD-ROM drive. To prevent direct exposure to the laser beam and hazard-
ous radiation exposure, do not open the enclosure or use the unit in any
unconventional way.