Supero SuperWorkstation 7038A-I, Руководство пользователя

Страница: 55 / 122

Chapter 5: Advanced Serverboard Setup
5-15
Overheat/Fan Fail LED (OH)
Connect an LED to pins 7 and 8 of
JF1 to provide advanced warning of
chassis overheating or fan failure.
Refer to the table on the right for pin
definitions.
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. This LED
is used to display SATA drive activ-
ity. See the table on the right for pin
definitions.
OH/Fan Fail LED
Pin Definitions (JF1)
Pin# Definition
7 Vcc
8 OH/Fan Fail
LED)
HDD LED
Pin Definitions (JF1)
Pin# Definition
13 Vcc
14 HD Active
NIC1 LED
Pin Definitions (JF1)
Pin# Definition
11 Vcc
12 Ground
NIC1/NIC2 LEDs
The LED connections for the LAN1
and LAN2 ports are on pins 11-12
and 9-10 of JF1, repectively. Attach an
LED cable to display network activity.
See the table for pin definitions.
OH/Fan Fail Indicator
Status
State Definition
Off Normal
On Overheat
Flash-
ing
Fan Fail
Power On LED
The Power On LED connector is lo-
cated on pins 15 and 16 of JF1 (use
JLED for a 3-pin connector). This
connection is used to provide LED
indication of power being supplied to
the system. See the table on the right
for pin definitions.
Power LED
Pin Definitions (JF1)
Pin# Definition
15 3.3V
16 PWR LED
Reset Connector
The reset header is located on pins 3
and 4 of JF1. Attach the reset switch
on the computer chassis to these
pins. See the table on the right for
pin definitions.
Reset Button
Pin Definitions (JF1)
Pin# Definition
3 Reset
4 Ground
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
definitions.
PWR Fail LED
Pin Definitions (JF1)
Pin# Definition
5 3.3V
6 PWR Supply Fail