Supero SuperWorkstation 5037A-i2-MA015, Руководство пользователя

Страница: 21 / 50

Chapter 3: Component Installation
3-1
Chapter 3
Component Installation
Several steps must be taken prior to installing components in the system. Installation
or replacement of most components require that power fi rst be removed from the
system. Please follow the procedures given for each type of component.
3-1 Removing Power
Use the following procedure to ensure that power has been removed disconnected
from the system.
1. Use the operating system to power down the system.
2. After the system has completely shut-down, carefully grasp the head of the
power cord and gently pull it out of the back of the power supply.
3. If your system has dual redundant power supplies, remove the cords from
both power supplies.
4. Disconnect the cord from the power strip or wall outlet.
3-2 Accessing the System
The 5037A-i2-MA015 features two removable side covers, allowing easy access
to the chassis interior.
Removing the Side Covers
1. Disconnect the system from any power souce.
2. Remove the two screws securing the left side cover.
3. Slide the left cover toward the rear.
4. Lift the left cover from the system.
5. Remove the three screws securing the right side cover.
6. Slide the right cover toward the rear
7. Lift the right cover from the system.