Supero SUPERSERVER 8047R-7RFT+, Руководство пользователя

Страница: 79 / 146

Chapter 5: Advanced Serverboard Setup
5-23
Fan Headers
There are eight fan headers on the
serverboard, all of which are 4-pin
fans. However, pins 1-3 of the fan
headers are backward compatible
with traditional 3-pin fans. See the
table on the right for pin de
fi nitions.
The fan speeds are controlled by
firmware thermal management via
IPMI Interface. When using Thermal
Management setting, please use all
3-pin fans or all 4-pin fans.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin de
fi nitions.
NMI Button
Pin Defi nitions (JF1)
Pin# De fi nition
19 Control
20 Ground
Fan Header
Pin Defi nitions
Pin# De fi nition
1 Ground
2 +12V
3 Tachometer
4 PWM Control
DOM Power Connector
A power connector for SATA DOM
(Disk On Module) devices is located
at JSD1. Connect an appropriate cable
here to provide power support for your
DOM devices.
DOM PWR
Pin Defi nitions
Pin# De fi nition
1 +5V
2 Ground
3 Ground
Power On LED
The Power On LED connector is
located on pins 15 and 16 of JF1
(use JLED for a 3-pin connector). This
connection is used to provide LED
indication of power being supplied to
the system. See the table on the right
for pin de
fi nitions.
Power LED
Pin Defi nitions (JF1)
Pin# De fi nition
15 3.3V
16 Control