Supero SUPERSERVER 7046GT-TRF, Руководство пользователя

Страница: 108 / 126

7-22
SUPERSERVER 7046GT-TRF Series User's Manual
Clear BMC System Event Log
Clear BMC System Log
Select OK and press the <Enter> key to clear the BMC system log. Select Cancel
to keep the BMC System log. The options are OK and Cancel.
Caution : Any cleared information is unrecoverable. Make absolutely sure
that you no longer need any data stored in the log before clearing the
BMC Event Log.

Set LAN Confi guration
Set this feature to confi gure the IPMI LAN adapter with a network address as shown
in the following graphics.
Channel Number - This feature displays the channel number.
Channel Number Status - This feature returns the channel status for the
Channel Number selected above: "Channel Number is OK" or "Wrong Channel
Number".
IP Address Source
This feature allows the user to select the source of the IP address for the system.
If Static is selected, the user will need to manually enter the IP address for the
system. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Confi guration Protocol) server in the network that the system is attached to, and
request the next available IP address. The options are DHCP and Static. If Static
is selected, the following items will be available for confi guration.
IP Address
The BIOS will automatically enter the IP address of this machine; however it
may be over-ridden. This should be in decimal and in dotted quad form (i.e.,
192.168.10.253). The value of each three-digit number separated by dots should
not exceed 255.
Subnet Mask
This item displays the current subnet mask setting for your IPMI connection. The
value of each three-digit number separated by dots should not exceed 255.
Gateway Address
The BIOS will automatically enter the Gateway address of this machine; however
it may be over-ridden. Gateway addresses are 4-decimal numbers in dotted quad
form (i.e., 192.168.10.253). The value of each 3-digit number separated by dots
should not exceed 255.