Supero SUPERSERVER 7046GT-TRF Скачать руководство пользователя страница 106

Страница: 106 / 126

7-20

SUPERSERVER 7046GT-TRF Series User's Manual

APIC ACPI SCI IRQ

When this item is set to Enabled, APIC ACPI SCI IRQ is supported by the system.

The options are Enabled and

Disabled

Headless Mode (Available ACPI Aware O/S='Yes')

This feature is used to enable system to function without a keyboard, monitor or

mouse attached The options are Enabled and

Disabled

ACPI Version Features (Available ACPI Aware O/S='Yes')

The options are ACPI v1.0,

ACPI v2.0

and ACPI v3.0. Please refer to ACPI's website

for further explanation: http://www.acpi.info/.

NUMA Support

If enabled, Non-Uniform Memory Access will enhance CPU performance. The

options are

Enabled,

Disabled and NUMA for SLES11 (SUSE Linux Enterprise

Server 11).



Trusted Computing (Available for OEM Only.)

TCG/TPM Support

Select Yes to enable support for trusted platforms (TPM 1.1/1.2) and allow the BIOS

to automatically download the drivers needed to provide support for the platforms

specifi ed. The options are Yes and

Indicate Physical

This feature Enables indication of physical presence to the TPM device each time

the system starts. The options are

and Yes.

TPM Deactivated/Activated

This feature activates or disables the TPM device. The options are

Don't Change

Set and Clear.

TPM Owner

This feature installs or clears TPM ownership The options are

Don't Change

, Enable

Install, Disable Install and Clear.

Execute TPM Command

This feature Enables or Disables the sending of commands to the TPM. The options

are

Don't Change

, Enabled and Disabled.

Clear the TPM

Press <Enter> to clear the TPM memory. This will erase all information related to

TPM support.

Содержание SUPERSERVER 7046GT-TRF































































































































Результаты поиска

Содержание SUPERSERVER 7046GT-TRF

Отзывы:

Похожие инструкции для SUPERSERVER 7046GT-TRF

Бренды по названию

Популярные бренды

Supero SUPERSERVER 7046GT-TRF, Руководство пользователя

Результаты поиска

Содержание SUPERSERVER 7046GT-TRF

Отзывы:

Похожие инструкции для SUPERSERVER 7046GT-TRF

Бренды по названию

Популярные бренды