Supero SUPERSERVER 7045W-NTR+, Руководство пользователя

Страница: 68 / 146

6-10
S
UPER
S
ERVER 7045W-NTR+ User's Manual
Adding Drives to the Storage Module
The storage module includes three full sized drive bays and the front LED panel.
The storage module can be set up one of three ways:
Add up to three extra hard drives to the drive trays (see page 6-8).
Add up to three peripheral drives (CD-ROM, DVD-ROM, etc.) to the drive trays
(see page 6-8).
Add fi ve hot swappable hard drives to the storage module. This confi guration
requires a mobile rack. See procedure below.
Using a Mobile Rack
The SC745TQ-R800 chassis accepts a CSE-M35T-1/CSE-M35TQ mobile rack
to install extra hot swappable hard drives. The mobile rack goes into the storage
module, which goes into the chassis.
Open the chassis cover.
Locate the drive release tabs.
Pull the fi rst drive release tab and push the drive tray toward the front of the
chassis. Repeat this for all three tabs.
Remove the hard drive tray rails from the hard drive tray. To do this, you must
remove two screws from each side. Do this for all three hard drive trays.
Attach the rails to a DVD-ROM, CD-ROM, fl oppy drive, or other peripheral
drive. The rails should fi t any standard sized peripherals.
Install all six hard drive rails to the mobile rack. Each individual rail requires
two screws. Also, make sure the arrow on the rail points toward the front of
the chassis.
Slide the mobile rack into the storage module and chassis.
For more information on mobile rack installation and use, refer to SC745 chassis
manual (available for download on our web site).
•
•
•
1.
2.
3.
4.
5.
6.
7.