Supero SuperServer 6033P-8R, Руководство пользователя

Страница: 38 / 114

5-2
S
UPERSERVER 6033P-8R User’s Manual
IMPORTANT: Always connect the power cord last and always remove it before
adding, removing or changing any hardware components. Make sure that you
install the processor into the CPU socket before you install the heatsink. The
X5DP8-G2 can support either one or two Xeon 604/603-pin processors of up to
3.20 GHz with a 1 MB integrated transfer cache. If installing one processor only,
install it into CPU socket #1.
!
5-2 PGA Processor and Heatsink Installation
When handling the processor package, avoid placing direct
pressure on the label area of the fan. Also, do not place the
serverboard on a conductive surface, which can damage the BIOS
battery and prevent the system from booting up.
1. Lift the lever on the CPU socket.
Lift the lever completely or you will
d a m a g e t h e C P U s o c k e t w h e n
power is applied. (Install a proces-
sor into CPU #1 socket first.)
2. Install the CPU in the socket.
Make sure that pin 1 of the CPU is
seated on pin 1 of the socket (both
corners are marked with a triangle).
When using only one CPU, install it
into CPU socket #1 (CPU socket #2
is automatically disabled if only one
CPU is used).
3. Press the lever down until you
hear it *click* into the locked posi-
tion. See Figure 5-1 for pictures of
the 604-pin CPU socket before and
after the processor is installed.
Socket lever
Pin 1
Socket lever in
locked position