Chapter 7: BIOS
7-23
X
SEL PEF Confi guration
Set PEF Confi guration
Set this feature to confi gure the Platform Event Filter (PEF). PEF interprets BMC
events and performs actions based on pre-determined settings or 'traps' under
IPMI 1.5 specifi cations. For example, powering the system down or sending an
alert when a triggering event is detected.
The following will appear if PEF Support is set to Enabled. The default is
Dis-
abled.
PEF Action Global Control
- These are the different actions based on BMC
events. The options are
Alert
, Power Down, Reset System, Power Cycle, OEM
Action, Diagnostic Interface.
Alert Startup Delay
- This feature inserts a delay during startup for PEF alerts.
The options are Enabled and
Disabled
.
PEF Alert Startup Delay
- This sets the pre-determined time to delay PEF
alerts after system power-ups and resets. Refer to Table 24.6 of the IPMI 1.5
Specifi cation for more information at www.intel.com. The options are
No Delay
,
30 sec, 60 sec, 1.5 min, 2.0 min.
Startup Delay
- This feature enables or disables startup delay. The options are
Enabled and
Disabled
.
PEF Startup Delay
- This sets the pre-determined time to delay PEF after
system power-ups and resets. Refer to Table 24.6 of the IPMI 1.5 Specifi cation
for more information at www.intel.com. The options are
No Delay
, 30 sec, 60
sec, 1.5 min, 2.0 min.
Содержание SUPERSERVER 6016GT-TF
Страница 5: ...v Preface Notes...
Страница 30: ...3 4 SUPERSERVER 6016XT TF 6016GT TF TF TM2 TF TC2 User s Manual Notes...
Страница 68: ...6 10 SUPERSERVER 6016XT TF 6016GT TF TF TM2 TF TC2 User s Manual Notes...
Страница 98: ...A 2 SUPERSERVER 6016XT TF 6016GT TF TF TM2 TF TC2 User s Manual Notes...
