Supero SUPERSERVER 6016GT-TF Скачать руководство пользователя страница 79

Страница: 79 / 104

Chapter 7: BIOS

7-11

Hand-Off support. When enabled, the EHCI Interface will be changed from the BIOS-

controlled to the OS-controlled. The options are Disabled and

Enabled

IDE/SATA/Floppy Confi guration

When this submenu is selected, the AMI BIOS automatically detects the presence

of the IDE devices and displays the following items:

SATA#1 Confi guration

If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while se-

lecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled,

Compatible

and Enhanced.

Confi gure SATA#1 as

This feature allows the user to select the drive type for SATA#1. The options are

IDE,

RAID

and AHCI. (When the option-RAID is selected, the item-ICH RAID

Code Base will appear. When the option-AHCI is selected, the item-SATA AHCI

will be available.)

ICH RAID Code Base (This feature is available when the option-RAID is

selected)

Select Intel to enable Intel's SATA RAID fi rmware to confi gure Intel's SATA RAID

settings. Select Adaptec to enable Adaptec's SATA RAID fi rmware to confi gure

Adaptec's SATA RAID settings. The options are

Intel

and Adaptec.

SATA AHCI (This feature is available when the option-AHCI is selected)

Select Enable to enable the function of Serial ATA Advanced Host Interface.

(Take caution when using this function. This feature is for advanced programmers

only.)The options are Enabled and

Disabled

. If the option-Enabled is selected,

the following item will display.

Hot Plug (This feature is available when the option-Enabled is
selected)

Select Enable to enable the hot plug function for the SATA devices. The

options are

Enabled

and Disabled.

SATA#2 Confi guration

Selecting Enhanced will set SATA#2 to native SATA mode. The options are Disabled,

and

Enhanced

Содержание SUPERSERVER 6016GT-TF









































































































Результаты поиска

Содержание SUPERSERVER 6016GT-TF

Отзывы:

Похожие инструкции для SUPERSERVER 6016GT-TF

Бренды по названию

Популярные бренды

Supero SUPERSERVER 6016GT-TF, Руководство пользователя

Результаты поиска

Содержание SUPERSERVER 6016GT-TF

Отзывы:

Похожие инструкции для SUPERSERVER 6016GT-TF

Бренды по названию

Популярные бренды