Supero SUPERSERVER 6015W-NT, Руководство пользователя

Страница: 84 / 110

7-16
S
UPER
S
ERVER 6015W-UR/6015W-U/6015W-NTR/6015W-NT User's Manual
DCA Delay Clocks (Available if supported by the CPU)
This feature allows the user to set the clock delay setting from snoop to prefetch
for Direct Cache Access. Select a setting from 8 (bus cycles) to 120 (bus cycles)
(in 8-cycle increment). The default setting is 32 (bus cycles).
Intel <R> Virtualization Technology (Available when supported by the CPU)
Select Enabled to use the feature of Virtualization Technology to allow one platform
to run multiple operating systems and applications in independent partitions, creat-
ing multiple "virtual" systems in one physical computer. The options are Enabled
and Disabled . (Note: If there is any change to this setting, you will need to power
off and restart the system for the change to take effect.) Please refer to Intel’s web
site for detailed information.
Intel EIST Support (Available when supported by the CPU)
Select Enabled to use the Enhanced Intel SpeedStep Technology and allows the
system to automatically adjust processor voltage and core frequency in an effort
to reduce power consumption and heat dissipation. The options are Enabled and
Disabled . Please refer to Intel’s web site for detailed information.
C State Supported (Available if supported by the CPU)
This feature allows the user to choose the ACPI Power Management State to be
supported by the BIOS. Select C1 to activate the Enhanced Halt State mode in
order to reduce power consumption. Select C2 to activate the Stop-Clock mode to
keep all CPU software visible. Select C3 to activate the Sleep State mode when the
CPU does not need to keep its cache coherent but maintains other states. Select
C4 to activate the package-level lower-power mode after each core of CPUs has
been set to C3 State in an effort to further reduce power consumption. The options
are C1 , C1C2 (C1 & C2), C1C2C3 (C1, C2 & C3), and C1C2C3C4 (C1, C2, C3 &
C4). Please refer to Intel’s web site for details.
I/O Device Confi guration
Access the submenu to make changes to the following settings.
KBC Clock Input
This setting allows you to select clock frequency for KBC. The options are 6MHz,
8MHz, 12MHz and 16MHz.
Serial Port A
This setting allows you to assign control of serial port A. The options are Enabled
(user defi ned), Disabled, and Auto (BIOS or OS controlled).