Supero SUPERSERVER 6015W-NT, Руководство пользователя

Страница: 52 / 110

5-20
S
UPER
S
ERVER 6015W-UR/6015W-U/6015W-NTR/6015W-NT User's Manual
Watch Dog Enable/Disable
JWD controls the Watch Dog func-
tion. Watch Dog is a system monitor
that can reboot the system when a
software application is “hung up”. Pins
1-2 will cause WD to reset the system
if an application is hung up. Pins 2-3
will generate a non-maskable inter-
rupt signal for the application that is
hung up. See the table on the right for
jumper settings. Watch Dog must also
be enabled in BIOS.
Note: When enabled, the user needs
to write their own application software
to disable the Watch Dog Timer.
Watch Dog
Jumper Settings (JWD)
Jumper Setting Defi nition
Pins 1-2 Reset
Pins 2-3 NMI
Open Disabled
I
2
C Enable/Disable
JI
2
C1 and JI
2
C2 are used to enable or
disable I
2
C bus on the serverboard.
See the table on the right for jumper
settings. Both jumpers must be set the
same for the setting to to function cor-
rectly (one jumper enables the clock
and the other enables the data). The
default setting is disabled.
I 2 C Bus Enable/Disable
Jumper Settings (JI
2
C1, JI
2
C2)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
Memory Voltage Select
JP2 is used to specify the voltage lev-
el for the onboard memory (SDRAM).
The default setting is on pins 1-2,
which lets the BIOS automatically
determine the correct setting. See the
table on the right for jumper settings.
Memory Voltage Select
Jumper Settings (JP2)
Jumper Setting Defi nition
Pins 1-2 Auto
Pins 2-3 1.5V
Open 1.8V