Supero SUPERSERVER 6015T-INF Скачать руководство пользователя страница 67

Страница: 67 / 114

Chapter 7: BIOS

7-5

32 Bit I/O

This option allows the user to enable or disable the function of 32-bit data transfer.

The options are Enabled and

Disabled

Transfer Mode

This option allows the user to set the transfer mode. The options are

Standard

Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, FPIO3/DMA1 and FPIO4/DMA2.

Ultra DMA Mode

This option allows the user to select Ultra DMA Mode. The options are

Disabled

Mode 0, Mode 1, Mode 2, Mode 3, Mode 4, and Mode 5.

Serial ATA

This setting allows the user to enable or disable the function of Serial ATA. The

options are Disabled and

Enabled.

Native Mode Operation

Select the native mode for ATA. The options are: Serial ATA and

Auto

SATA Controller Mode

Select

Compatible

to allow the SATA and PATA drives to be automatically-detected

and be placed in the Legacy Mode by the BIOS. Select Enhanced to allow the

SATA and PATA drives to be to be automatically-detected and be placed in the

Native IDE Mode.

Note:

Enhanced mode is supported by the Windows 2000 OS

or a later version.

When the SATA Controller Mode is set to Enhanced, the following items will

display:

Serial ATA (SATA) RAID Enable

Select Enable to enable Serial ATA RAID Functions. (For the Windows OS

environment, use the RAID driver if this feature is set to Enabled. When this

item is set to Enabled, the item: "ICH RAID Code Base" will be available for

you to select Intel or Adaptec Host RAID ﬁ rmware to be activated. If this item

is set to

Disabled

, the item-SATA AHCI Enable will be available.) The options

are Enabled and

Disabled

ICH RAID Code Base

(Available when SATA RAID is Enabled)

Select Intel to enable Intel's SATA RAID ﬁ rmware. Select Adaptec to use Adaptec's

HostRAID ﬁ rmware. The options are

Intel

and Adaptec

Содержание SUPERSERVER 6015T-INF



















































































































Результаты поиска

Содержание SUPERSERVER 6015T-INF

Отзывы:

Похожие инструкции для SUPERSERVER 6015T-INF

Бренды по названию

Популярные бренды

Supero SUPERSERVER 6015T-INF, Руководство пользователя

Результаты поиска

Содержание SUPERSERVER 6015T-INF

Отзывы:

Похожие инструкции для SUPERSERVER 6015T-INF

Бренды по названию

Популярные бренды