Supero SUPERSERVER 5026T-3F, Руководство пользователя

Страница: 65 / 100

Chapter 6: Advanced Chassis Setup
6-5
SAS/SATA Drive Installation
Mounting a SAS/SATA Drive in a Drive Carrier
The SAS/SATA drives are mounted in drive carriers to simplify their installation and
removal from the chassis. Since these carriers also help promote proper airfl ow for
the SAS drive bays, even empty carriers without SAS drives installed must remain
in the chassis.
To add a new SAS drive, install a drive into the carrier with the printed circuit 1.
board side toward the carrier so that the mounting holes align with those in
the carrier.
Secure the drive to the carrier with four screws, as shown in Figure 6-3. 2.
Figure 6-3. Mounting a SAS/SATA Drive in a Carrier
!
Important: Regardless of how many SAS/SATA hard drives are
installed, all drive carriers must remain in the drive bays for
proper airfl ow.
Use caution when working around the SAS/SATA backplane. Do
not touch the backplane with any metal objects and make sure no
ribbon cables touch the backplane or obstruct the holes, which
aid in proper airfl ow.
!