Supero SUPERSERVER 2027TR-D70RF+, Руководство пользователя

Страница: 92 / 144

6-10
SUPERSERVER 2027TR-D70RF+ USER'S MANUAL
Installing the Backplane
Installing the Backplane into the Chassis (Figure 6-10)
1. Ensure that all of the hard drive carriers have been removed from the bays in
the front of the chassis and that the spring bar has been loosened as directed
in the previous section. Confi rm that the power cord has been removed from
the rear of the power supply.
2. Secure the side mounting bracket to the backplane with the two screws
provided.
3. Slide the backplane into the chassis at a slight angle, pushing it up against
the side of the chassis.
4. Ease the backplane forward, against the front of the chassis. This will aid in
the alignment of the mounting holes.
5. Align the mounting holes in the backplane with the holes in the chassis.
Replace the four screws at the top of the backplane and the screw on the side
of the chassis.
6. Adjust the spring bar, then tighten the spring bar screws in the fl oor of the
chassis.
7. Reconnect all cables and return the hard drive carriers to their bays in the
front of the chassis.
8. Replace the chassis cover and power-up the system.
Figure 6-10: Installing the Backplane
1
3
1
4