Supero SUPERSERVER 1027R-WRF, Руководство пользователя

Страница: 58 / 108

5-24
SUPERSERVER
1027R-WRF USER'S MANUAL
IPMB Header
Pin Defi nitions
(JIPMB1)
Pin# Defi nition
1 Data
2 Ground
3 Clock
4 No Connection
IPMB
A System Management Bus header for
IPMI 2.0 is located at JIPMB1. Connect
the appropriate cable here to use the
IPMB I 2 C connection on your system.
T-SGPIO 1/2 Headers
Two SGPIO (Serial-Link General
Purpose Input/Output) headers are
located on the motherboard. These
headers support Serial_Link interface
for onboard SATA connections. See
the table on the right for pin defi nitions.
DOM Power Connector
A power connector for SATA DOM
(Disk_On_Module) devices is located
at JSD1. Connect an appropriate cable
here to provide power support for your
DOM devices.
DOM Power
Connector
Pin Defi nitions
Pin# Defi nition
1 +5V
2 Ground
3 Ground
SGPIO Header Pin Defi nitions
(T-SGPIO1/T-SGPIO2)
Pin# Defi nition Pin# Defi nition
1 NC 2 Data In
3 Ground 4 Data Out
5 Load 6 Ground
7 Clock 8 NC
(NC = No Connection)
Standby Power Connector
T h e S t a n d b y P o w e r c o n n e c t i o n
header is located at JSTBY1 on the
motherboard. See the table on the right
for pin defi nitions. (You must also have
a cable to use this feature.)
Standby Power
Pin Defi nitions
Pin# Defi nition
1 +5V Standby
2 Ground
3 Wake-up