Supero SuperServer 1027GR-72R2+, Руководство пользователя

Страница: 82 / 124

6-6
S
UPER
S
ERVER 1027GR-72RT2+/72R2+/TRT2+/TR2+ Series User's Manual
6-4 Drive Bay Installation/Removal
Accessing the Drive Bays
Because of their hotswap capability, you do not need to access the inside of the
chassis or power down the system to install or replace hard drives. Proceed to the
next section for instructions.
Hard Drive Installation
The hard drives are mounted in drive carriers to simplify their installation and
removal from the chassis. These carriers also help promote proper airfl ow for
the drive bays. For this reason, even empty carriers without drives installed must
remain in the chassis.
Removing Hard Drive Carriers from the Chassis
1. Press the release button on the drive carrier. This extends the drive carrier handle.
2. Use the handle to pull the drive carrier out of the chassis.
Installing a Hard Drive into a Drive Carrier
1. Remove the dummy drive, which comes pre-installed in the drive carrier, by
removing the screws securing the dummy drive to the carrier. Note that these
screws cannot be reused on the actual 2.5" hard drive.
2. Insert a drive into the carrier with the PCB side facing down and the connec-
tor end toward the rear of the carrier.
Figure 6-5. Installing GPU Cards into the Left and Right GPU Brackets
Left Side GPU Bracket
and Cards
Right Side GPU Bracket
and Cards
1
2