Supero SuperServer 1027GR-72R2+, Руководство пользователя

Страница: 18 / 124

2-4
S
UPER
S
ERVER 1027GR-72RT2+/72R2+/TRT2+/TR2+ User's Manual
2-5 Installing the System into a Rack
This section provides information on installing the SC118GH chassis into a rack unit
with the rails provided. There are a variety of rack units on the market, which may
mean that the assembly procedure will differ slightly. You should also refer to the
installation instructions that came with the rack unit you are using.
Note: This rail will fi t a rack between 26" and 33.5" deep.
Stability hazard . The rack stabilizing mechanism must be in place, or the
rack must be bolted to the fl oor before you slide the unit out for servicing.
Failure to stabilize the rack can cause the rack to tip over.
Identifying the Sections of the Rack Rails
The chassis package includes two rack rail assemblies in the rack mounting kit.
Each assembly consists of two sections: an inner fi xed chassis rail that secures
directly to the server chassis and an outer fi xed rack rail that secures directly to
the rack itself.
Figure 2-1. Identifying the Sections of the Rack Rails
Inner Rail
Extension:
attach to the
chassis
Outer Rails:
slide together, then
attach to the front
and rear brackets
Inner Rail (preattached
to the chassis)
Front and Rear
Brackets: attach to
the rack