Supero SuperServer 1027GR-72R2+, Руководство пользователя

Страница: 104 / 124

7-18
S
UPER
S
ERVER 1027GR-72RT2+/72R2+/TRT2+/TR2+ User's Manual
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard , and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unifi ed
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled .

Super IO Confi guration
Super IO Chip: This item displays the Super IO chip used in the motherboard.

Serial Port 1 Confi guration/Serial Port 2 Confi guration
Serial Port
Select Enabled to enable a serial port specifi ed by the user. The options are En-
abled and Disabled.
Device Settings
This item displays the settings of a serial port specifi ed by the user.
Change Settings
Use this feature to set the optimal Platform Environment Control Interface (PECI)
setting for a serial port specifi ed. The default setting is Auto , which will allow the
AMI BIOS to automatically select the best PECI setting.
Device Mode
Use this feature to select the desired mode for a serial port specifi ed. The options
are Normal and High Speed.

Serial Port Console Redirection
COM 1/SOL
These two submenus allow the user to confi gure the following Console Redirection
settings for a COM Port specifi ed by the user.
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled. The default setting for COM1 is Disabled ,
and for SOL is Enabled .