Supero Supero X9SRL Скачать руководство пользователя страница 89

Страница: 89 / 109

Chapter 4: AMI BIOS

4-19



Trusted Computing Configuration (Available when a TPM

Device is detected by the BIOS)

TPM Support

Select Enable to activate support for trusted platforms (TPM 1.1/1.2) and allow
the BIOS to automatically download the drivers needed to provide support for the

platforms specified. The options are Disable and

Enable

TPM State

This feature changes the TPM State. The options are Disable and

Enable

. Note:

The system will restart to change the TPM State.

Pending TPM operation

Displays any TPM-related operation by the system.

The following are informational status messages that indicate the current TPM
State:

TPM Enabled Status

TPM Active Status

TPM Owner Status



Intel TXT (LT-SX) Configuration

Intel TXT Initialization

Intel TXT (Trusted Execution Technology) helps protect against software-based

attacks and ensures protection, confidentiality and integrity of data stored or

created on the system. The options are Enabled and

Disabled

This section also displays Intel TXT related information and dependencies
needed to support this feature.



ME Subsystem

This item displays the ME Subsystem information.

Содержание Supero X9SRL














































































































Результаты поиска

Содержание Supero X9SRL

Отзывы:

Похожие инструкции для Supero X9SRL

Бренды по названию

Популярные бренды

Supero Supero X9SRL, Руководство пользователя

Результаты поиска

Содержание Supero X9SRL

Отзывы:

Похожие инструкции для Supero X9SRL

Бренды по названию

Популярные бренды