Supero Supero X8DTU-6F+ Скачать руководство пользователя страница 86

Страница: 86 / 111

5-12

X8DTU-6F+/X8DTU-6TF+/X8DTU-6(T)F+-LR

Motherboard

User’s Manual

Legacy USB Support

Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy USB

support will be automatically enabled if a legacy USB device is installed on the

motherboard, and vise versa. The settings are Disabled, Enabled

and

Auto

Port 64h/60h Emulation

Select Enabled to enable 60h/64h emulation for complete USB keyboard support

for operating systems that are not compatible with USB devices. The options are

Enabled and

Disabled.

USB 2.0 Controller (Available when the item: USB Functions is disabled)

This item indicates if the onboard USB 2.0 controller is activated. The default set-

ting is

Enabled

USB 2.0 Controller Mode

This setting allows you to select the USB 2.0 Controller mode. The options are

Hi-Speed (480 Mbps

) and Full Speed (12 Mbps).

BIOS EHCI Hand-Off

Select Enabled to enable BIOS Enhanced Host Controller Interface support to

provide a workaround solution for an operating system that does not support EHCI

Hand-Off. When enabled, the EHCI Interface will be changed from BIOS-controlled

to OS-controlled. The options are Disabled and

Enabled



IDE/SATA Confi guration

When this submenu is selected, the AMI BIOS automatically detects the presence

of the IDE and SATA devices and displays the following items:

SATA#1 Confi guration

If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while se-

lecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled,

Compatible and

Enhanced

Confi gure SATA#1 as (Not available when SATA#1 Confi guration is
disabled)

This feature allows the user to select the drive type for SATA#1. The options are

IDE,

RAID

and AHCI. (When the option-RAID is selected, the item-ICH RAID

Code Base will appear. When the option-AHCI is selected, the item-ICH AHCI

Codebase will be available.)

Содержание Supero X8DTU-6F+
















































































































Результаты поиска

Содержание Supero X8DTU-6F+

Отзывы:

Похожие инструкции для Supero X8DTU-6F+

Бренды по названию

Популярные бренды

Supero Supero X8DTU-6F+, Руководство пользователя

Результаты поиска

Содержание Supero X8DTU-6F+

Отзывы:

Похожие инструкции для Supero X8DTU-6F+

Бренды по названию

Популярные бренды