Supero Supero X7SBi Скачать руководство пользователя страница 90

Страница: 90 / 101

B-10

X7SBi User's Manual

B-2 Installing the Windows XP/2003 for systems

with RAID Functions

Installing a New Windows XP/2003 Operating System

a. Insert the Microsoft Windows XP/2003 Setup CD in the CD Driver, and the
system will start booting up from CD.

b. Press the <F6> key when the message-" Press F6 if you need to install a third
party SCSI or RAID driver" displays.

c. When the Windows XP/2003 Setup screen appears, press "S" to specify ad-
ditional device(s).

d. Insert the driver diskette-"Intel AA RAID XP/2003 Driver for ICH9R" into Drive
A: and press the <Enter> key.

e. Insert the driver diskette-"ITE RAID XP/2003 Driver for IDE" into Drive A: and
press the <Enter> key.

f. Choose the Intel(R)82801GR/GH

SATA RAID Controller

from the list indicated

in the XP/2003 Setup Screen, and press the <Enter> key.

g. Press the <Enter> key to continue the installation process. (If you need to
specify any additional devices to be installed, do it at this time.) Once all devices

are specified, press the <Enter> key to continue with the installation.

h. From the Windows XP/2003 Setup screen, press the <Enter> key. The XP/2003

Setup will automatically load all device files and then, continue the Windows

XP/2003 installation.

i. After the Windows XP/2003 Installation is completed, the system will automati-
cally reboot.

j. Insert Supermicro's CD that came with the package into the CD Drive during
system reboot, and the following screen will appear.

Note

: the current version of the ICH9R SATA RAID Utility can only support the

Windows XP/2003 Operating System.

Содержание Supero X7SBi






































































































Результаты поиска

Содержание Supero X7SBi

Отзывы:

Supero Supero X7SBi, Руководство пользователя, Страница: 90 / 101

Результаты поиска

Содержание Supero X7SBi

Отзывы: