Supero Supero X7SBi, Руководство пользователя

Страница: 61 / 101

Chapter 4: BIOS
4-9
information regarding hardware/software support for this function, please refer to
Intel's and Microsoft's websites.
Enhanced Intel Speed Step Support (Available when supported by
the CPU.)
Select Enabled to use the Enhanced Intel SpeedStep Technology and allows
the system to automatically adjust processor voltage and core frequency in an
effort to reduce power consumption and heat dissipation. The default setting is
GV1/GV3 . Please refer to Intel’s website for detailed information.

Advanced Chipset Control
Access the submenu to make changes to the following settings.
Warning
: Take Caution when changing the Advanced settings. An incor-
rect value, a very high DRAM frequency, or an incorrect DRAM timing may
cause the system to become unstable. When this occurs, reset the setting
to the default setting.
Clock Spectrum Feature
If Enabled, the BIOS will monitor the level of Electromagnetic Interference caused
by the components and will attempt to decrease the interference whenever needed.
The options are Enabled and
Disabled .
Memory Remapping
Select Enable to enable the functionality of Memory Remapping above 4GB. The
settings are
Enabled and Disabled.
Enable VT-d
Select Enable to enable the functionality of the Intel Virtualization Technology for
Direct I/O support, which offers fully-protected I/O resource-sharing across the
Intel platforms, providing the user with greater reliability, security and availability
in networking and data-sharing. The settings are Enabled and
Disabled .
High Precision Event Time
Select Yes to activate the High Precision Event Timer (HPET), which is capable
of producing periodic interrupts at a much higher frequency than a Real-time
Clock (RTC) can in synchronizing multimedia streams, providing smooth playback
and reducing the dependency on other timestamp calculation devices, such as
an x86 RDTSC Instruction embedded in a CPU. The High Precision Event Timer
is used to replace the 8254 Programmable Interval Timer. The options for this
feature are Yes and
No .