Supero SUPERO X7SBi-LN4, Руководство пользователя

Страница: 19 / 97

Chapter 2: Installation
2-1
Chapter 2
Installation
2-1 Electro-Static Sensitive Devices
Electro-Static Discharge (ESD) can damage electronic com ponents. To prevent
damage to your system board, it is important to handle it very carefully. The following
measures are generally sufficient to protect your equipment from ESD.
Precautions
Use a grounded wrist strap designed to prevent static discharge.
•
Touch a grounded metal object before removing the board from the antistatic
•
bag.
Handle the board by its edges only; do not touch its components, peripheral
•
chips, memory modules or gold contacts.
When handling chips or modules, avoid touching their pins.
•
Put the motherboard and peripherals back into their antistatic bags when not
•
in use.
For grounding purposes, make sure your computer chassis provides excellent
•
conductivity between the power supply, the case, the mounting fasteners and
the motherboard.
Use only the correct type of onboard CMOS battery as specified by the
•
manufacturer. Do not install the onboard battery upside down to avoid possible
explosion.
Unpacking
The motherboard is shipped in antistatic packaging to avoid static damage. When
unpacking the board, make sure the person handling it is static protected.
2-2 Motherboard Installation
Be sure to mount the motherboard into the chassis before you install the CPU onto
the motherboard.
All motherboards have standard mounting holes to fit different
types of chassis. Make sure that the locations of all the mounting holes for both
motherboard and chassis match. Make sure that the metal standoffs click in or are
screwed in tightly (not to exceed 8lb of torque). Then use a screwdriver to secure
the motherboard onto the motherboard tray.
Note: Some components are very close to the mounting holes. Please take
precautionary measures to prevent damage to these components when installing
the motherboard to the chassis.