Supero SUPERO SuperServer 6026TT-H6IBQRF Скачать руководство пользователя страница 79

Страница: 79 / 110

Chapter 7: BIOS

7-7

tion and heat dissipation.

Please refer to Intel’s web site for detailed information.

The options are Disable (Disable GV3) and

Enable (Enable GV3)

Intel® TurboMode Technology

Select Enabled to use the Turbo Mode to boost system performance. The options

are

Enabled

and Disabled.

Intel® C-STATE Tech

If enabled, C-State is set by the system automatically to either C2, C3 or C4 state.

The options are Disabled and

Enabled

C-State package limit setting

If set to Auto, the AMI BIOS will automatically set the limit on the C-State package

Auto

, C1, C3, C6 and C7.

C1 Auto Demotion

When enabled, the CPU will conditionally demote C3, C6 or C7 requests to C1 based

on un-core auto-demote information. The options are Disabled and

Enabled.

C3 Auto Demotion

When enabled, the CPU will conditionally demote C6 or C7 requests to C3 based

on un-core auto-demote information. The options are Disabled and

Enabled.

Clock Spread Spectrum

Select Enable to use the feature of Clock Spectrum, which will allow the BIOS to

monitor and attempt to reduce the level of Electromagnetic Interference caused by

the components whenever needed. The options are

Disabled

and Enabled.



Advanced Chipset Control

The items included in the Advanced Settings submenu are listed below:



CPU Bridge Confi guration

QPI Links Speed

This feature selects QPI's data transfer speed. The options are Slow-mode, and

Full Speed

QPI Frequency

This selects the desired QPI frequency. The options are

Auto

, 4.800 GT,

5.866GT, 6.400 GT.

Содержание SUPERO SuperServer 6026TT-H6IBQRF















































































































Результаты поиска

Содержание SUPERO SuperServer 6026TT-H6IBQRF

Отзывы:

Похожие инструкции для SUPERO SuperServer 6026TT-H6IBQRF

Бренды по названию

Популярные бренды

Supero SUPERO SuperServer 6026TT-H6IBQRF, Руководство пользователя

Результаты поиска

Содержание SUPERO SuperServer 6026TT-H6IBQRF

Отзывы:

Похожие инструкции для SUPERO SuperServer 6026TT-H6IBQRF

Бренды по названию

Популярные бренды