manualshive.com logo in svg

Supero SUPERO SuperServer 6026TT-H6IBQRF, Руководство пользователя, Страница: 110 / 110

Поделиться
Скачать
Supero SUPERO SuperServer 6026TT-H6IBQRF Скачать руководство пользователя страница 110

C-4

SUPERSERVER SYS-6026TT-H6RF/H6IBXRF/H6IBQRF User's Manual

(continued from front)

The products sold by Supermicro are not intended for and will not be used in life support systems, 
medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency com-
munication devices or other critical systems whose failure to perform be reasonably expected to 
result in signifi cant injury or loss of life or catastrophic property damage. Accordingly, Supermicro dis-
claims any and all liability, and should buyer use or sell such products for use in such ultra-hazardous 
applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend 
and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and 
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.

Notes

Содержание SUPERO SuperServer 6026TT-H6IBQRF















































































































Отзывы:

Нет отзывов