Supero Supero PDSMi-LN4, Руководство пользователя

Страница: 21 / 101

Chapter 2: Installation
2-3
Pin 1
South Key
North Key
South Center Edge
North Center Edge
Socket clip
CPU in the CPU socket
Plastic cap is released
from the load plate if
CPU properly installed.
Locate Pin 1 on the CPU socket. 1. Note :
Pin 1 is the corner marked with a triangle).
Please note that the North Key and the
South Key are located vertically in the
CPU housing.
Position the motherboard in such a way 2.
that Pin 1 of the CPU socket is located at
the left bottom of the CPU housing.
Use your thumb and your index fi nger to 3.
hold the CPU at the North Center Edge and
the South Center Edge of the CPU.
Align Pin 1 of the CPU with Pin 1 of the 4.
socket. Once aligned, carefully lower the
CPU straight down to the socket. (**Do not
drop the CPU on the socket. Do not move
the CPU horizontally or vertically. Do not
rub the CPU against the surface or against
any pins of the socket to avoid damage to
the CPU or the socket.)
With the CPU inside the socket, inspect the 5.
four corners of the CPU to make sure that
the CPU is properly installed.
Use your thumb to gently push the socket 6.
clip down to the clip lock.
If the CPU is properly installed into the 7.
socket, the plastic cap will be automatically
released from the load plate when the Clip
is pushed in the clip lock. Remove the
plastic cap from the motherboard.
Warning : Please keep the plastic cap.The
motherboard and the CPU must be shipped
with the plastic cap properly installed to
protect the CPU pins. Shipment without the
CPU plastic cap properly installed will void
the warranty.)
!
Inserting the CPU into the CPU Socket