Supero SUPER X5DPL-8GM Скачать руководство пользователя страница 46

Страница: 46 / 84

3-4

UPER X5DPL-8GM/X5DPL-iGM

User’s Manual

site. Also, check the current BIOS revision and make sure it is newer than

your BIOS before downloading. Select your motherboard model and down-

load the BIOS file to your computer. Unzip the BIOS update file and you will

find the readme.txt (flash instructions), the phlash.bat (BIOS flash utility),

the platform.bin (platform file) and the BIOS image (xxxxxx.rom) files. Copy

these files onto a bootable floppy and reboot your system. It is not neces-

sary to set BIOS boot block protection jumpers on the motherboard. At the

DOS prompt, enter the command "phlash." This will start the flash utility and

give you an opportunity to save your current BIOS image. Flash the boot

block and enter the name of the update BIOS image file.

Question:

After flashing the BIOS my system does not have video.

How can I correct this?

Answer:

If the system does not have video after flashing your new BIOS,

it indicates that the flashing procedure failed. To remedy this, first clear

CMOS per the instructions in this manual and retry the BIOS flashing proce-

dure. If you still do not have video, please use the following

BIOS Recov-

ery Procedure

. Boot up the system from a Win98 boot disk. Type

A:\>phlash /s /cz /mfg /mode=3 [BIOS filename.rom], making sure you insert

the spaces. The system will flash BIOS from here and reboot once it

finishes.

To recover BIOS: a recovery flash requires an update key over the COM

port as follows: hardwire Pin4 to Pin8, hardwire Pin9 and Pin7 to Pin6, and

hardwire Pin3 to Pin2. Use the Supermicro CD to make a “Phoenix BIOS

Crisis Disk for Supermicro Mainboard”. This disk includes a BIOS file named

“bios.rom”. Please note, this BIOS file can be changed to a different Phoenix

BIOS file as long as it’s named “bios.rom”. Connect the serial key to the

COM port, insert the recovery disk into floppy drive and power on the

system. When the system starts to read the disk, remove the serial key

immediately. When the system is done with the BIOS recovery, it will auto-

matically reboot.

Question:

What's on the CD that came with my motherboard?

Answer:

The supplied compact disc has quite a few drivers and programs

that will greatly enhance your system. We recommend that you review the

CD and install the applications you need. Applications on the CD include

chipset drivers for Windows and security and audio drivers.

Содержание SUPER X5DPL-8GM





















































































Результаты поиска

Содержание SUPER X5DPL-8GM

Отзывы:

Похожие инструкции для SUPER X5DPL-8GM

Бренды по названию

Популярные бренды

Supero SUPER X5DPL-8GM, Руководство пользователя

Результаты поиска

Содержание SUPER X5DPL-8GM

Отзывы:

Похожие инструкции для SUPER X5DPL-8GM

Бренды по названию

Популярные бренды