Supero SUPER X5DPL-8GM, Руководство пользователя

Страница: 36 / 84

2-14
S
UPER X5DPL-8GM/X5DPL-iGM User’s Manual
Mb LAN Enable/Disable
Change the setting of jumper JP3
to enable or disable the Mb LAN
port on the motherboard (see Fig-
ure 2-3 for location). Refer to the
table on the right for jumper set-
tings. The default setting is En-
abled.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
Mb LAN
Enable/Disable
Jumper Settings
(JP3)
2-6 Jumper Settings
Explanation of
Jumpers
To modify the operation of the
motherboard, jumpers can be
u s e d t o c h o o s e b e t w e e n
o p t i o n a l s e t t i n g s . J u m p e r s
create shorts between two pins
to change the function of the
connector. Pin 1 is identified
w i t h a s q u a r e s o l d e r p a d o n
the printed circuit board. See
the motherboard layout pages
for jumper locations.
N o t e : O n t w o p i n j u m p e r s ,
"Closed" means the jumper is
o n a n d " O p e n " m e a n s t h e
jumper is off the pins.
Connector
Pins
Jumper
Cap
Setting
Pin 1-2 short
3 2 1
3 2 1
CMOS Clear
JBT1 is used to clear CMOS. Instead of pins, this jumper consists of con-
tact pads to prevent accidentally clearing the contents of CMOS.
To clear CMOS, 1) First unplug the power cord(s) 2) With the power discon-
nected, short the CMOS pads with a metal object such as a small screw-
driver 3) Remove the screwdriver (or shorting device) 4) Reconnect the
power cord(s) and power on the system.
Note: Do not use the PW_ON connector to clear CMOS.