Supero SC812L Series, Руководство пользователя

Страница: 30 / 52

SC812L C hassis M anual
4-8
Two heavy duty blowers provide cooling for the chassis . These blowers circulate air
through the chassis as a means of lowering the chassis internal temperature .
4 - 6 Installation S tep 4: S ystem Blowers
Figure 4 -1 7: U n - assembled S ystem Blowers
S ystem Blower
Blower Rack
Blower Post
S ystem Blower General Information
When using the SC812L chassis be aware of the following:
• The blower rack for the SC812L can be adjusted into two different positions:
L eft and R ight .
• The blower rack for the SC812L " U " series chassis can be confi gured in up to
four positions . The only positions needed are the two positions furthest to the
right .
• Blowers can be removed from the blower rack and rotated by 15 degrees .
• The chassis includes foam barriers that regulate the air stream to the rear of
the chassis . I f you move the system blowers from right to left, use the second
set of foam barriers located in the accessory box .
• IMPORTANT: Do not run the system without the foam barriers installed
properly