Supero P4DCE Plus II, Руководство пользователя

Страница: 43 / 95

Chapter 2: Installation
2-17
SCSI Enable/Disable
(P4DC6/P4DC6+/P4DC6+II
only)
The SCSI Termination jumper at
JP34 allows you to enable or dis-
able the onboard SCSI controller.
The normal (default) position is on
pins 1-2 to enable SCSI termina-
tion. See Table 2-29 for jumper
settings.
Ju m p e r
P o sitio n
P in s 1 -2
P in s 2 -3
D e fin itio n
E n a b le d
D isa b le d
T a b le 2 -2 9
S C S I E n a b le /D is a b le
J u m p e r S e tting s
(J P 3 4 )
SCSI Termination Enable/
Disable (P4DC6/P4DC6+/
P4DC6+II only)
Jumpers JPA1 and JPA2 allow you
to enable or disable termination for
t h e i n d i v i d u a l S C S I c h a n n e l s .
Jumper JPA1 controls SCSI channel
A and JPA2 controls SCSI channel
B. The normal (default) setting is
open to enable (teminate) both SCSI
channels. If you wish to connect
external SCSI devices, you should
d i s a b l e t e r m i n a t i o n f o r t h e
channnel(s) you will be connecting
them to. See Table 2-30 for jumper
settings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
E n a b le d
D isa b le d
T a b le 2 -3 0
S C S I T e rm in atio n E n a b le /
D is a b le J u m p e r S e ttin g s
(J P A 1 , J P A 2 )
LAN Enable/Disable
Change the setting of jumper JP35
to enable or disable the onboard
LAN or NIC (Network Interface
Card) on the motherboard. See
Table 2-31 for jumper settings.
The default setting is enabled
Ju m p e r
P o sitio n
P in s 1 -2
P in s 2 -3
D e fin itio n
E n a b le d
D isa b le d
T a b le 2 -3 1
L A N (N IC )
E n a b le /D is a b le
J u m p e r S e tting s
(J P 3 5 )